I recently started looking for different rust removers that might help me clean the traps, realizing that in order to get what is probably more than a half century's worth of rust off the traps, I would have to fully submerse the traps in the solution for an extended period of time. I found most rust removers that sell in large quantities end up running about $20 per gallon, which is a little out of my budget. My wife suggested I try vinegar, so I went to the store and bought a gallon of vinegar and gave it a try. I didn't soak the first trap long enough, but it still came out better than I had expected. This picture shows one of the traps in the vinegar. The other bucket is a bucket of water. In order to keep the vinegar as clean as possible, I worked on the trap in the water bucket, only using the vinegar to soak the traps. I had to keep them submersed as much as I could since the iron would quickly begin to discolor again with rust if it started to dry. Consequently, I had to empty and refill the water bucket numerous times. When I had finished cleaning it, I had to quickly run a cloth over it to clean it and then, with another cloth covered in oil, I oiled the trap before it could rust again.
This picture shows the difference between an uncleaned trap by a cleaned one. Gabs wanted to see how they worked, so I set one of them and sprang it with the metal rod used to anchor the trap. They still work as well as ever.
I soaked the second trap in the vinegar a little longer than the first, and it cleaned up even better.
The traps' pans, which were almost completely illegible when covered in rust, revealed that the traps date back to 1917 or 1918 based on the patent dates. Debs probably thinks I'm crazy to spend so much time repairing traps that I will never use, but it's a lot of fun preserving pieces of family history!




